Anycubic DLP teardown – Nemo Andrea – Microtubule enthusiast
As part of my plan to make an open hardware Maskless Lithography Aligner I wanted to get more familiar with the Texas Instruments DLP300S/301S (digital) micromirror device (DMD). This product was created for use in 3D resin printers, which use patterned UV light to pattern photosensitive resin. I will update this blog post over time with more information, so it might be worth checking back occasionally ⏰.
Anycubic DLP teardown As part of my plan to make an open hardware Maskless Lithography Aligner I wanted to get more familiar with the Texas Instruments DLP300S/301S (digital) micromirror device (DMD) . This product was created for use in 3D resin printers , which use patterned UV light to pattern photosensitive resin. I will update this blog post over time with more information, so it might be worth checking back occasionally ⏰. The first and as of writing this post the only (to my knowledge) printers that uses this DMD are the Anycubic Photon Ultra and D2 . Given the price point that the DLP3
saved by
related reading
- iitpkd.ac.in/sites/default/files/2020-09/Rekha_TIM_2020_Synchronous detection to reduce offsets in focus error.pdfiitpkd.ac.in
- Control of Wafer Scanners: Methods and Developmentsfab.cba.mit.edu
- Deepa Kundur: Real-Time Digital Signal Processingcomm.utoronto.ca
- GitHub - schlae/cm5-reveng: Reverse engineered Raspberry Pi Compute Module 5 · GitHubgithub.com
- Dave Erickson's Web Pagedjerickson.com
- Digital light processing - Wikipediaen.wikipedia.org
- Layman's Guide to IC Reverse Engineeringsiliconzoo.org
- Tiny TPUtinytpu.com
- Lab on the Cheaplabonthecheap.com
- LAM2023030013.pdflight-am.com
- GitHub - FundamentalFrequency/LMN-3-Build-Guide: Build guide for the LMN-3 projectgithub.com
- EUV lithographyen.wikipedia.org